This 0.9mm, 45° Carbide replacement blade is from GAP. They fit the Graphtec CE-5000-60 and Craft ROBO Pro plotter cutters that we sell. They are offered for those who may be on a tight budget but still want a very good replacement blade.

A carrier sheet has a “sticky” area on it and is used to firmly hold heat transfer paper during outline cutting. The carrier sheet would then go into the cutter. Adhesive size is 10.5" x 18" (will hold 11" x 17" sheets)

Package contains two (2) sheets.

Single set of high quality stainless steel tweezers. These are perfect for picking and weeding small, enclosed details, like inside an “A”. The tweezers are packaged in a plastic tube.

Unique vinyl weeding/masking film stripping tool, with a ball tip point that will not damage clear film substrates. This tool is perfect for “lifting” the corner of a cut vinyl sheet, in preparation to weeding the entire sheet. The tool is packaged in a plastic tube.

We include this kit, free, with all new Graphtec cutters. It is a single high quality cutting knife holder with two XACTO™ type XB-7E blades, and a handy pointed weeding tool. It comes with a safety cap in a plastic tube.

These blades are sharp all the way to the point and have a multitude of handy uses. At less than 20¢ a blade, there is no reason to ever fool with a dull blade. This box of 100 blades substitutes for the XACTO™ blade #X611 and fits both of the above holding tools.

The Material Saver Rack sits on the floor, in front of cutter plotters on a stand. It is 30” long by 24” wide and the curved shape allows long vinyl jobs to curl into the rack. Considering the dust, dirt and hair on most floors, you don’t want vinyl touching it. If you don’t have one, use a large box.

These are handy little critters. We use five of them ourselves, for storage. The heavy gauge wire racks hold 16 rolls of 3 inch core diameter material without using valuable floor space. This rack is durable enough to hold even up to 16 rolls of 30 in. x 50 yd. material with ease. This is a very convenient way to protect vinyl rolls and quickly find what you want. Adjustable screw mounting clips are included, allowing alignment with studs in most walls.

If you need this rack, we offer a Tip O’ The Alpha Hat; you are selling a whole lot of something!

This product is made of heavy gauge wire and constructed to hold 72 rolls of 3” inch core diameter material; up to 2000 lbs. total. Just being able to quickly see and find multiple colored vinyl rolls will save you hours of time, to say nothing of the added protection of valuable inventory. This unit easily assembles in less than ten minutes. The 6 parts are easily assembled with a flat head screw driver. The unit has 9 ball caster rollers to allow easy movement, even with the stand fully loaded. Size: 30in. x 30 in. x 64in. Allow 7-10 days for delivery. FREE freight- continental US.