These blades are genuine Graphtec
0.9mm, 45° Tungsten Carbide replacement blades. They fit the Graphtec
CE-5000-60 and Craft ROBO Pro plotter cutters that we offer and are what
comes with the original plotter cutter. Spare blades are the one item
that we would have, above all else.
This specialty blade is useful
if you are cutting a lot of rhinestone stencils or vinyl flock. It must
be used only with the Red Tip blade holder (PHP32-CB15N-HS). The extra
thick blade and very robust Red Tip holder provide a very long lasting
This 0.9mm, 45° Carbide replacement blade is from GAP. They fit the
Graphtec CE-5000-60 and Craft ROBO Pro plotter cutters that we sell. They
are offered for those who may be on a tight budget but still want a very
good replacement blade.
This replacement blade is compatible with all Silhouette
electronic cutting tools. Contains one blade and instructions for its
installation. (Not compatible with the discontinued blade pin SILH-BLADE-R2).
The Silhouette spatula is the perfect tool to lift delicate designs from
the cutting mat without curling or tearing. The pointed tip makes it easy
to slide under cutout designs and work around the most intricate shapes.
This tool has a curved pointed tip and a non-slip yellow poly handle
that will allow you to weed out the smallest image. Tool is packaged in
a plastic tube for easy storage.
Tweezers – GAP-TW-PX1 Purchase
Single set of high quality stainless steel tweezers. These are perfect
for picking and weeding small, enclosed details, like inside an “A”.
The tweezers are packaged in a plastic tube.
Tool - Ball Tip – GAP-WT-BTX1 Purchase
Unique vinyl weeding/masking film stripping tool, with a ball tip point
that will not damage clear film substrates. This tool is perfect for “lifting”
the corner of a cut vinyl sheet, in preparation to weeding the entire
sheet. The tool is packaged in a plastic tube.
with Safety Cap – GAP-XB-SCX1 Purchase
We include this kit, free, with all new Graphtec cutters. It is a single
high quality cutting knife holder with two XACTO™ type XB-7E blades,
and a handy pointed weeding tool. It comes with a safety cap in a plastic
These blades are sharp all the way to the point and have a multitude
of handy uses. At less than 20¢ a blade, there is no reason to ever
fool with a dull blade. This box of 100 blades substitutes for the XACTO™
blade #X611 and fits both of the above holding tools.
These racks are not essential
but, as you grow, they are very handy. Get them when you need them.
Saver Rack – GAP-MS-1000 Purchase
The Material Saver Rack sits on the floor, in front of cutter plotters
on a stand. It is 30” long by 24” wide and the curved shape
allows long vinyl jobs to curl into the rack. Considering the dust, dirt
and hair on most floors, you don’t want vinyl touching it. If you
don’t have one, use a large box.
Plated” Wall Mount Material Rack – GAP-WR-1600 Purchase
These are handy little critters. We use five of them ourselves, for storage.
The heavy gauge wire racks hold 16 rolls of 3 inch core diameter material
without using valuable floor space. This rack is durable enough to hold
even up to 16 rolls of 30 in. x 50 yd. material with ease. This is a very
convenient way to protect vinyl rolls and quickly find what you want.
Adjustable screw mounting clips are included, allowing alignment with
studs in most walls.
Plated” Floor Stand Rack – GAP-FS-7230 Call to Order - $667.00
If you need this rack, we offer a Tip O’ The Alpha Hat; you are
selling a whole lot of something!
This product is made of heavy gauge wire and constructed to hold 72 rolls
of 3” inch core diameter material; up to 2000 lbs. total. Just being
able to quickly see and find multiple colored vinyl rolls will save you
hours of time, to say nothing of the added protection of valuable inventory.
This unit easily assembles in less than ten minutes. The 6 parts are easily
assembled with a flat head screw driver. The unit has 9 ball caster rollers
to allow easy movement, even with the stand fully loaded. Size: 30in.
x 30 in. x 64in. Allow 7-10 days for delivery. FREE freight- continental
Revised: April 25, 2013 | Page served in: 0.13 seconds